| Multi Needle Lock Stitch | Small Quantity Lots | Fast Response Times | |||
| Quilt Designs | Full Stitch Designs | Minimum Wastage | |||
| Ready Quilted Lining Fabrics | Matching Stitch Colour | ||||
| Polyester Waddings | In House Design |
 |
|
 |
||
 |
Harvey
Quilting Ltd beleive strongly that the higest possible quality of
work is required at all times, We will seek to ensure your complete
satisfaction with all the work we process and if for any reason the
required quality cannot be achieved, then you will be informed at
the earliest possible opportunity. To maintain a uniform quilting standard, Harvey Quilting Ltd adheres to the Marks and Spencer Specification for quilting. M&S Specification (Summary) 1. Shuttle Changes: All under thread bobbins to be changed completely when the second bobbin runs out. 2. Fabric Joins: A maximum overlap of 15cm is allowed. 3. Waddings Joins: To be butt ended if possible, if overlapped or sliced, a maximum tolerance of 25cm is allowed. 4. Stitch Size: Unless otherwise specified, must be 10 stitches per 2.5cm, along the stitch line on all designs. 5. Presentation: All rolls must have one edge trimmed cleanly parallel with the fabric selvedge. 6. Inspection: All rolls must be inspected and mending carried out, if required, prior to despatch. Any faults that cannot be mended must be clearly market.  |
Tolerances 1. Maximum allowable design tolerance to be + or - 2mm. 2. Loss of width and length of fabric due to quilting will vary depending on the thickness of wadding and stitch design. The actual loss should be determined at sampling. Is normally in the range of 2.5 to 5%. Needles Size - To be be no larger than 110's. Point - Either normal round or ball point depending on fabric type. Threads Unless otherwise specified, Top threads are to be 120/3 continuous filament polyester threads. Threads containing a cotton composition must not be used in flame retardant garments. Bobbins, in all work apart from lightweight single face quilting, are NM90/2 spun polyester composition to limit the possibility of stitch run back. Matching of stitch colour to be ensured at sampling stage. Stitch tensions to be checked on a regular basis to ensure the elimination of loss or tight stitching. Waddings: Unless otherwise specified all waddings are to 100% polyester. They must come from an approved source and be at least 5cm wider than the fabric being quilted. |
|
